郴州某复杂硫化铅锌矿阶段磨浮试验研究

针对郴州某复杂硫化铅锌矿资源的性质特点,采用铅快速浮选后尾矿再磨再选的阶磨阶选工艺,较好地实现了铅锌的高效浮选回收。研究了磨矿方式、捕收剂和调整剂种类及用量等因素对该矿石浮选的影响,确定了最佳浮选条件,通过小型闭路浮选试验,得到了铅品位60.05%、回收率89.63%的铅精矿和锌品位47.01%、回收率88.14%的锌精矿。     

Potential of the Electronic Nose for the Detection of Respiratory Diseases with and without Infection

Respiratory tract infections are common, and when affecting the lower airways and lungs, can result in significant morbidity and mortality. There is an unfilled need for simple, non-invasive tools that can be used to screen for such infections at the clinical point of care. The electronic nose (eNose) is a novel technology that detects volatile organic compounds (VOCs). Early studies have shown that certain diseases and infections can result in characteristic changes in VOC profiles in the exhaled breath. This review summarizes current knowledge on breath analysis by the electronic nose and its potential for the detection of respiratory diseases with and without infection.     

紫外分光光度法测定核酸含量的影响因素分析

选择寡聚核苷酸、鲑鱼精单链DNA、小牛胸腺双链DNA标准物质为样本,系统研究了溶液pH、苯酚、丙酮、蛋白质、多糖等对紫外分光光度法测量结果的影响情况,另外考察了核糖核酸(RNA)和脱氧核糖核酸(DNA)的相互影响情况。研究发现基于分光光度法的核酸定量分析,易受溶液pH、苯酚、丙酮、蛋白质、多糖等的影响,另外,DNA和RNA之间也会相互干扰。因此,紫外分光光度法测定核酸含量时,特别是该方法用于核酸标准物质特性量值确定时,需要样品高度纯化,pH确定的条件下才能保证测量结果的准确可靠。     

Weatherability of hybrid organic–inorganic silica protective coatings on glass

Currently, there is a growing interest in the application of silicon-based technologies for the development of advanced hybrid organic–inorganic coatings with strong weatherability. In this study, the sol–gel process is used to prepare such coatings on glass and their resistance to weathering effects is assessed afterwards. Various sols were prepared by mixing a silica-based inorganic matrix (tetraethyl orthosilicate) with different quantities of silica alkoxides functionalised with various organic groups. Subsequently, the sols were dip-coated onto glass samples at low temperatures without any heat treatment. The coatings prepared were analysed before and after three model ageing tests simulating various weathering parameters. After ageing, the best performing coatings showed good overall homogeneity and transparency (optical microscopy, SEM), improved water repellency and adhesion to the glass substrate (static contact angle measurements, cross-cut tape tests) and no colour or chemical composition changes (UV–VIS, FTIR). Compared with commercial hybrid silica products, the alkyl- and methacryloxy-functionalised silica coatings particularly displayed improved homogeneity, elasticity and barrier properties. Thus, these low temperature coatings, easily applicable to thin films, appear to fulfil the main requirements for the protection of the glass exposed to weathering phenomena.     

A methodology to assess suitability of a site for small scale wet and dry CSP systems

This study presents a methodology to assess suitability of a site for small scale concentrated solar power (CSP) systems for its energy conversion efficiency and make‐up water requirement. Energy conversion efficiency of CSPs relies not only on the level of direct solar radiation but also on the performance of the cooling system. Regions with high solar potential have to deal with heat rejection at elevated temperatures which causes reduced energy conversion efficiencies due to high condenser temperatures. It is desirable to utilize wet cooling systems as they can achieve temperatures lower than the dry bulb temperature by evaporative cooling. On the other hand, such regions usually lack water resources which deteriorate the sustainable nature of CSP applications. This study combines various available models for both solar resource estimation and cooling systems' performance considering (i) the influence of ambient temperatures, and (ii) the influence of humidity levels. These models are integrated together to analyze the use of dry or wet cooling systems in terms of overall energy output and water consumption at a selected site in northern Cyprus. The model inputs consist of only annual hourly surface weather data and the location of the site of interest. The results show that dry cooling unit at northern Cyprus is capable of saving water about 18.7 ton/MWh while it produces 27% less energy compared to the wet cooling alternative for the representative annual weather data. Copyright © 2015 John Wiley & Sons, Ltd.     

Investigation of novel anthracene‐bridged carbazoles as sensitizers and Co‐sensitizers for dye‐sensitized solar cells

Novel anthracene‐bridged carbazole organic dyes (designated ML4 and ML5) were synthesized using the Suzuki coupling reaction. These dyes were designed to be donor‐π‐conjugation‐acceptor sensitizers for dye‐sensitized solar cells, where the carbazole moiety acts as the donor, the anthracene moiety provides the π‐conjugation, and the cyano acrylic acid acts as the acceptor. Solar cells were fabricated with ML4 and ML5 alone with low power conversion efficiencies, but they were also used as co‐sensitizers with N719, improving the efficiency of the dye‐sensitized solar cells produced by ~3% and ~10%, respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Use of Lactobacillus paracasei isolated from whey for silver nanocomposite synthesis: Antiradical and antimicrobial properties against selected pathogens

The present research emphasizes the use of safe, inexpensive, and available whey using Lactobacillus paracasei as a source in silver nanocomposite synthesis as an alternative bioactive agent for dairy and biomedical applications. Through the multiinstrumental approach used in this study based on spectroscopic and microscopic methods as well as spectrometric techniques, the characterization and evaluation of silver composites and their antimicrobial and antiradical properties were enabled. Synthesized silver nanocomposites have been found in form of nanocrystals, naturally coated by an organic surface with high antimicrobial and antiradical properties. Furthermore, this work also presents an innovative approach regarding the organic surface (naturally secreted by the bacteria isolated from whey) of the core of nanoparticles, which has already been explored and therefore is starting to supplement the scientific approach concerning biologically synthesized nanoparticles. This work also presents a general frame on the resistance subject by performing the trial interaction of commercially available antibiotics (kanamycin and ampicillin) with new bioactive compounds that can create novel knowledge on complementing their action. Moreover, synthesized silver nanocomposites have shown great antioxidant and antimicrobial effects against various foodborne pathogens from dairy products and drug resistance pathogens found in the medical area to rank on the top of mortality rate.     

Deep-blue thermally activated delayed fluorescence emitter with a very high fluorescence rate

Conventional thermally activated delayed fluorescence (TADF) molecules achieve small energy differences between the lowest singlet and triplet excited states (ΔE_ST) by enhancing the intramolecular charge transfer, which inevitably leads to a wide emission spectrum and low fluorescence rate. Here, we prepared a deep blue TADF molecule via a small ΔE_ST pyridine-phenol fluoroboron complex as the acceptor. The small ΔE_ST is maintained when carbazole donors are attached to the 4-position of the phenyl rings in the fluoroboron complex. Benefiting from the strong electron coupling between the donor (D) and acceptor (A) moieties, the compound Cz-4-BF exhibits a high fluorescence rate of 4.8 × 10⁸ s⁻¹ and a small D-A dihedral angle change in the excited state. Consequently, a photoluminescence (PL) quantum yield of nearly 100% and a PL spectrum with full-width at half-maximum (FWHM) < 60 nm were obtained in solution and low-concentration doped films. A TADF-sensitized fluorescence (TSF) device containing Cz-4-BF achieves an external quantum efficiency of 21%, which is higher than the devices employing classical fluorescent emitters and multiple resonance-type TADF emitters. The Cz-4-BF-based TSF device shows significantly improved color coordinates of (0.14, 0.10) versus a control device without Cz-4-BF.     

In situ measurements of human cough aerosol hygroscopicity

The airborne dynamics of respiratory droplets, and the transmission routes of pathogens embedded within them, are governed primarily by the diameter of the particles. These particles are composed of the fluid which lines the respiratory tract, and is primarily mucins and salts, which will interact with the atmosphere and evaporate to reach an equilibrium diameter. Measuring organic volume fraction (OVF) of cough aerosol has proved challenging due to large variability and low material volume produced after coughing. Here, the diametric hygroscopic growth factors (GF) of the cough aerosol produced by healthy participants were measured in situ using a rotating aerosol suspension chamber and a humidification tandem differential mobility analyser. Using hygroscopicity models, it was estimated that the average OVF in the evaporated cough aerosol was 0.88 ± 0.07 and the average GF at 90% relative humidity (RH) was 1.31 ± 0.03. To reach equilibrium in dry air the droplets will reduce in diameter by a factor of approximately 2.8 with an evaporation factor of 0.36 ± 0.05. Hysteresis was observed in cough aerosol at RH = ∼35% and RH = ∼65% for efflorescence and deliquescence, respectively, and may depend on the OVF. The same behaviour and GF were observed in nebulized bovine bronchoalveolar lavage fluid.